The Intellivision is a video game console released by Mattel in 1979. Development of the console began in 1978, less than a year after the introduction of its main competitor, the Atari 2600. The word intellivision is a portmanteau of "intelligent television". Over 3 million Intellivision units were sold and a total of 125 games were released for the console.
Intellivision II[edit | edit source]
In addition to the ECS module, 1982 also saw the introduction of a redesigned model, called the Intellivision II (featuring detachable controllers and sleeker case), the System Changer (which played Atari 2600 games on the Intellivision II), and a music keyboard add-on for the ECS.
Instead of an internal power supply like the original system had, the Intellivision II would use an external AC adapter. Its main drawback, however, was that it was a non-standard power supply — running on 16.2V — meant that if the AC adapter was lost or damaged, the system could be rendered useless, as replacement power supplies for that particular voltage requirement were not readily available.
Mattel also changed the Intellivision II's internal ROM program (called the EXEC) in an attempt to lock out unlicensed 3rd party titles. To make room for the lock-out code while retaining compatibility with existing titles, some portions of the EXEC code were moved in a way that changed their timing. While most games were unaffected, a couple of the more popular titles had certain sound effects that the Intellivision II reproduced differently than intended, although the games remained playable. Mattel's attempt to lock out competitors' software titles was only temporarily successful, as the 3rd-party game manufacturers quickly figured out how to get around it.
Hardware[edit | edit source]
CPU [edit | edit source]
The CPU is the General Instruments CP1610. This is a general purpose 16-bit microprocessor which has 1024 separate op-codes, and can equally well use 8-bit, 10-bit, 14-bit, and 16-bit RAM or ROM. The CP1610 in the Intellivision uses a machine cycle rate of 894.886 KHz. Individual operations on the 1610 take between 4 and 12 microcycles (Note: the CP1600 is the prototypical or conventional form of the microprocessor; the CP1610 used in the Intellivision is precisely the same in all respects except for a differing clock rate.)
Since most 1610 instructions are 10-bits wide, game programs are stored in 10-bit wide ROMs. This 10-bit "byte" is referred to as a decle (rhymes with "heckle"). Some instructions require 16 bits; these are stored in two successive 10-bit locations, referred to as a bidecle. (For prototyping, dual 8-bit EPROMs are used, with the low 8 bits of each decle stored in one EPROM and the top 2 bits stored in the other.)
STIC [edit | edit source]
The Standard Television Interface Chip (STIC), the General Instruments AY-3-8900-1, controls the video display of the Intellivision. Roughly speaking, the CPU tells the STIC how to create a desired visual display, and the STIC does all the dirty work without further work by the CPU.
The STIC will display a background field of 240 "cards" (20 wide and 12 high; each card is 8 by 8 pixels), giving a resolution of 160 pixels wide and 96 pixels high (each pixel is 2 TV lines high and is in the proportion of 5 wide by 4 high). NOTE: The STIC does NOT display the far right column of pixels, giving an actual displayed resolution of 159 by 96 pixels. Each pixel can be in any of 16 colors (eight "primaries" and eight "pastels.").
In addition, the STIC controls 8 "moving objects", each of which can be 8 wide by 8 high or, at double resolution, 8 wide by 16 half-pixels high (each moving object can also be double-sized in width and/or height). The beauty of this system is that once the CPU has defined a background and a moving object shape, it can change the location of an object merely by writing a different address to the STIC. NOTE: The moving objects can be located on a grid space wider and taller than the displayed background, allowing them to smoothly slide on or off the screen at the edges.
SYSTEM RAM [edit | edit source]
The CPU and the STIC are linked together and served by the System RAM, the GI RA-3-9600. The System RAM is not just a simple dumb memory chip. It contains (1) 240 locations of information about the 240 background cards (BACKTAB), (2) 112 locations of simple 16-bit ram, used as the CPU stack and (3) a bus arbitration controller to control access to the Graphics ROM (GROM) and the Graphics RAM (GRAM), both of which are accessed by the CPU and the STIC (but never at the same time). The System RAM is crucial from the hardware point of view, but the timing features are transparent to the programmer.
SOUND CHIP [edit | edit source]
The sound chip is a GI AY-3-8914. This chip contains three separate channels of sound, each channel of which can be individually controlled for frequency and volume. There is also a noise generator on the chip, which can be added to any of the three channels. All three channels are mixed, and fed to the sound output of the TV.
GROM AND GRAM [edit | edit source]
Graphics ROM and the Graphics RAM (GROM and GRAM) are, in effect, character chips, storing shapes of images used on-screen. GRAM is programmable and GROM is not.
GRAM has space for 64 program-defined 8 by 8 bit images. Both background and moving object images are stored here; since there can be up to 8 double-resolution moving objects defined in GRAM, there are always at least 64-(8*2)=48 background locations which the program can define.
GROM contains 213 predefined 8 by 8 bit image locations (TRIVIA: it was intended to contain 256 images, but space was stolen for an overflow of system software from the EXEC ROM) which include numbers, upper and lower case alphabetic characters, punctuation, and graphics characters (triangles, lines and whatnot).
For example, GROM location #37 contains the character E stored as:
01111110 01000000 01000000 01111110 01000000 01000000 01111110 00000000
The 240 BACKTAB locations each points to a location in GRAM or GROM. For example, if BACKTAB location #1 points to GROM location #37, an E will appear in the upper left corner of the screen.
BACKTAB contains other information on the display, such as foreground and background color, and whether the character is in GROM or GRAM. Therefore, one GROM or GRAM image can be used to produce different colored images on different parts of the same screen (e.g. you can have a white E on a black background on one part of the screen and a red E on a blue background on a different part of the screen; both use the same bit images pattern stored in GROM location #37).
GROM is a GI RO-3-9503 2K ROM. GRAM is made up of two GTE 3539 256-byte static RAM chips.
THE EXEC [edit | edit source]
The whole system is controlled by a 4K program called the Executive (the EXEC) which resides in the Intellivision's Executive ROM chip (with an additional 344 bytes over in the GROM chip). In a sense, the EXEC is the main game program, and the plug-in cartridge merely contains subroutines and data which are used by the EXEC. Normally, only EXEC routines access GROM, GRAM and the STIC control registers. The EXEC contains routines for moving objects around the screen, loading GRAM, creating sound and music, testing for moving object interaction, etc. The EXEC was written for Mattel Electronics by David Rolfe (Major League Baseball) at APh Technology Consultants. [Note: In the Intellivision, the Executive ROM is physically two 2K chips, a GI RO-3-9502 and a GI RO-3-9504; in the Intellivision II it is a single 4K GI RO-3-9506 chip.]
SCRATCHPAD RAM [edit | edit source]
The scratchpad 256-by-8-bit static RAM chip (GTE 3539) is used by the EXEC and by the sound chip for temporary data storage. 147 bytes are left over for use by the game program to keep track of score, level, lives left, and other game variables.
HAND CONTROLLERS [edit | edit source]
An Intellivision has a left and a right hand controller. Each controller has a disc controller, a 12-number keypad, and 4 "action" buttons (2 on the left side and 2 on the right side). The disc controller can record any of 16 different locations when pressed, somewhat like a joystick. There are two peculiarities of the hand controller:
- The top action keys are wired together, so there are really only three separate action buttons: left bottom, right bottom and the left/right top button.
- The 12-number keypad duplicates the disc controller and the action keys, so you can either use the disc controller and the action buttons -- OR -- the keypad, but not both at the same time.
Each hand controller is hooked to an 8-bit input port. (These are physically the input ports of the sound chip, but that's not relevant to the programmer.) The disc controller outputs a 5-bit code; the action buttons output a 3-bit code. The 12-number keypad outputs an 8-bit code. The EXEC contains routines which debounce key inputs and convert 5-bit disc hardware codes to numbers, 0 through 15, which indicate directions. A game program can access the input ports directly, but the EXEC routines are usually used, instead.
Add-on[edit | edit source]
- Entertainment Computer System (Intellivision II only)
- Keyboard Component
- System Changer (Intellivision II only)
INTV Corporation[edit | edit source]
In 1984, a group of investors bought the rights to the name Intellivision and started selling Mattel's remaining video game inventory, primarily by mail-order. Sales were strong enough that INTV contracted Quicksilver Software and Realtime Associates to have former Mattel programmers complete unreleased Intellivision games, and produce new ones.
INTV kept the Intellivision name alive for several years, surviving well into the Nintendo/Sega era before finally closing due to bankruptcy in 1991.
Clones[edit | edit source]
Like Atari, Mattel marketed their console to a number of retailers as a rebadged unit. All are simply clones of the Intellivision Master Component with minor cosmetic differences.
- Radio Shack Tandyvision One
- Sears Super Video Arcade
- GTE-Sylvania Intellivision
- INTV Master Component (also called INTV System III and the INTV Super Pro System)